Yamaha DTX-MULTI Owner's Manual - Page 84

UTILITY Setting Area (UTIL) UTIL1-7 Pan Depth page UTIL2-2 Click-track Master Volume page UTIL1-7 ≥≥PanDepth=≥64 1 1 Pan depth Use this parameter to adjust the width of the instrument's overall stereo-panning field while maintaining the individual pan settings for drum and musical instrument sounds. Settings 1 to 127 UTIL2-2≥≥ ≥≥≥Volume=127 1 1 Click-track master volume Use this parameter to set the master volume for click-track sounds. Settings 0 to 127 UTIL1-8 Auxiliary Output page UTIL1-8 AuxOutSel=L&R+ph 1 1 Auxiliary output selection (AuxOutSel) Use this parameter to indicate where audio input via the AUX IN jack will be output. • L&R+ph Auxiliary-input audio will be output via both the OUTPUT (L/MONO and R) and PHONES jacks. • phones Auxiliary-input audio will be output via the PHONES jack only. Settings L&R+ph or phones UTIL2 CLICK Click Track Settings UTIL2 CLICK In the CLICK section, you can set parameters related to the click track. For example, you can set the type of sound to be used, the volume, and where the click track will be output. MIDI parameters related to the click track can also be set here. With the CLICK page (UTIL2) displayed, press the [ENTER] button to access its five parameter-setting pages (UTIL2-1 to UTIL2-5). You can use the [B]/[C] buttons to navigate between these pages. UTIL2-1 Click-track Voice page UTIL2-1≥≥ Voice=Metronome1 1 1 Click-track voice Use this parameter to select from a range of different sounds for use with the click track. Settings Metronome1, Metronome2, Cowbell, Stick, Human UTIL2-3 Click-track Beat Volume page 1 UTIL2-3≥A...=9≥ƒ=9 0≥ææ=0≥ø=0 1 1 Click-track beat volumes Use these parameters to set volumes for different beat timings within the click track. The meanings of the symbols used on this page are shown below. Example: Beat timings for four beats per bar Accents 4 th notes 8 th notes 16 th notes 8 th note triplets Settings 0 to 9 NOTE • If the time signature from the PATTERN setting area or for pattern recording is 3/8, 6/8, 9/8, 12/8, or 15/8, this page will display ACC, dotted quarter notes, eighth notes, and sixteenth notes. UTIL2-4 Click-track Output page UTIL2-4≥≥ ClkOutSel=phones 1 1 Click-track output selection (ClkOutSel) Use this parameter to specify where the click track will be output when activated. In a live-performance setting, for example, you would normally want the click track to be output to headphones only, and in such a case, "phones" should be selected here. • L&R+ph The click-track will be output via both the OUTPUT (L/MONO and R) and PHONES jacks. • phones The click-track will be output via the PHONES jack only. Settings L&R+ph, phones 84 Owner's Manual