ZyXEL FSG2200HNU User Guide - Page 108
Table 25, SSID1, Network > Wireless LAN, General
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 7 Wireless LAN Click Network > Wireless LAN to open the General screen. Figure 35 Network > Wireless LAN > General The following table describes the labels in this screen. Table 25 Network > Wireless LAN > General LABEL DESCRIPTION Enable Check this to activate wireless LAN. Wireless LAN Multiple SSID Check this to have the ZyXEL Device broadcast more than one SSID. SSID1 ~ SSID 4 The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated. Wireless devices associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. Enter the SSID you want to use. If you want to use more than one SSID, check Multiple SSID, enter the SSID(s) in the field(s) and click Enable. You can enable up to four SSIDs simultaneously, and each SSID can have its own security configuration (refer to Section 7.3 on page 110 for setting the wireless security). Hide SSID Note: SSID1 is enabled by default and cannot be disabled. Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. 108 FSG2200HNU User's Guide