ZyXEL FSG2200HNU User Guide - Page 189
Static Route Add/Edit
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Chapter 14 Static Route 14.3 Static Route Add/Edit Select a static route index number and click Add or Edit. The screen shown next appears. Use this screen to configure the required information for a static route. Figure 79 Advanced > Static Route > Add/Edit The following table describes the labels in this screen. Table 59 Advanced > Static Route > Add/Edit LABEL DESCRIPTION Active This field allows you to activate/deactivate this static route. Route Name Enter the name of the IP static route. Destination IP Address This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. IP Subnet Mask Enter the IP subnet mask here. Gateway IP Address Enter the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. Back Click this to return to the previous screen without saving. Apply Click this to save your changes back to the ZyXEL Device. Reset Click this to begin configuring this screen afresh. FSG2200HNU User's Guide 189