ZyXEL FSG2200HNU User Guide - Page 47
b/g/n, Mode Select, Apply, Network > Wireless LAN > Security, WPA-PSK, Pre-Shared Key, Status
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 3 Tutorial 4 Select 802.11b/g/n in the Mode Select field. Click Apply. 5 Open Network > Wireless LAN > Security. Set security mode to WPA-PSK and enter "ThisismyWPA-PSKpre-sharedkey" in the Pre-Shared Key field. Select TKIP as the encryption type. Note: If you want to use WAP2-PSK security mode, select AES as the encryption type. Click Apply. Tutorial: Network > Wireless LAN > Security 6 Open the Status screen. Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status. Tutorial: Status FSG2200HNU User's Guide 47
Chapter 3 Tutorial
FSG2200HNU User’s Guide
47
4
Select
802.11b/g/n
in the
Mode Select
field. Click
Apply
.
5
Open
Network > Wireless LAN > Security
.
Set security mode to
WPA-PSK
and enter “ThisismyWPA-PSKpre-sharedkey”
in the
Pre-Shared Key
field.
Select
TKIP
as the encryption type.
Note: If you want to use
WAP2-PSK
security mode, select
AES
as the encryption
type.
Click
Apply
.
Tutorial: Network > Wireless LAN > Security
6
Open the
Status
screen. Verify your wireless and wireless security settings under
Device Information
and check if the WLAN connection is up under
Interface
Status
.
Tutorial: Status