ZyXEL FSG2200HNU User Guide - Page 27
The RESET Button, 1.7 The WPS/WLAN Button
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 1 Introducing the ZyXEL Device Table 1 LED Descriptions LED COLOR STATUS DESCRIPTION CATV Green On The ZyXEL Device's CATV signal is turned on. Off The ZyXEL Device is turned off. Red Off The ZyXEL Device is turned on but there is no CATV signal. Refer to the Quick Start Guide for information on hardware connections. 1.6 The RESET Button If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the passwords will be reset to the defaults. 1 Make sure the POWER LED is on (not blinking). 2 To set the device back to the factory default settings, press the RESET button for ten seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been restored and the device restarts. 1.7 The WPS/WLAN Button Use the WPS/WLAN button on the top of the device to turn the wireless LAN off or on. You can also use it to activate WPS in order to quickly set up a wireless network with strong security. Make sure the POWER LED is on (not blinking) before using the WLAN button. • Press the WLAN button for one second and release it. The WLAN LED should change from on to off or vice versa. • Press the WLAN button for five seconds to turn on WPS. See Section 7.5 on page 117 for more on using WPS to configure your wireless clients. FSG2200HNU User's Guide 27