ZyXEL FSG2200HNU User Guide - Page 242
USB Device Connection
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Chapter 24 Troubleshooting In the next example, phone port 1 is configured to use SIP account 1 and phone port 2 is configured to use SIP account 2 for incoming calls. In this case, every time you receive a call from your SIP account 1, the phone connected to phone port 1 rings. Similarly, every time you receive a call from your SIP account 2, phone port 2 rings. To apply these configuration changes you need to configure the Analog Phone screen. See Section 9.4 on page 144. Figure 109 Incoming Calls: Individual Configuration PHONE 1 SIP 1 PHONE 2 SIP 2 24.7 USB Device Connection The ZyXEL Device fails to detect my USB device. 1 Make sure your USB device is formatted using FAT32. 2 Disconnect the USB device. 3 Reboot the ZyXEL Device. 4 If you are connecting a USB hard drive that comes with an external power supply, make sure it is connected to an appropriate power source that is on. 5 Re-connect your USB device to the ZyXEL Device. 242 FSG2200HNU User's Guide