ZyXEL FSG2200HNU User Guide - Page 96
The Client List Screen
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 6 LAN Setup The following table describes the labels in this screen. Table 22 Network > LAN > DHCP Server LABEL DESCRIPTION DHCP Setup Active DHCP Server Select this to have your ZyXEL Device can assign IP addresses, an IP default gateway and DNS servers to LAN computers and other devices that are DHCP clients. If you do not check this, the DHCP server will be disabled. You need to manually configure the IP addresses of the computers and other devices on your LAN. When DHCP is used, the following fields need to be set. IP Pool Starting This field specifies the first of the contiguous addresses in the IP address Address pool. Pool Size This field specifies the size, or count of the IP address pool. DNS Server First DNS Server Select From ISP if your ISP dynamically assigns DNS server information (and the ZyXEL Device's WAN IP address). Second DNS Server Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. Third DNS Server Apply Reset Select None if you do not want to configure DNS servers. You must have another DHCP sever on your LAN, or else the computers must have their DNS server addresses manually configured. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Click this to save the changes. Click this to begin configuring this screen afresh. 6.4 The Client List Screen Use this table to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses. Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. 96 FSG2200HNU User's Guide