ZyXEL FSG2200HNU User Guide - Page 48
Configuring the Wireless Client - manual
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 3 Tutorial 7 Click the WLAN Client List hyperlink in the AP's Status screen. You can see if any wireless client has connected to the AP. Tutorial: WLAN Client List 3.3.3 Configuring the Wireless Client This section describes how to connect the wireless client to a network. 3.3.3.1 Connecting to a Wireless LAN The following sections show you how to join a wireless network using the ZyXEL utility, as in the following diagram. The wireless client is labeled C and the access point is labeled AP. C AP There are three ways to connect the client to an access point. • Configure nothing and leave the wireless client to automatically scan for and connect to any available network that has no wireless security configured. • Manually connect to a network. • Configure a profile to have the wireless client automatically connect to a specific network or peer computer. This example illustrates how to manually connect your wireless client to an access point (AP) which is configured for WPA-PSK security and connected to the Internet. Before you connect to the access point, you must know its Service Set IDentity (SSID) and WPA-PSK pre-shared key. In this example, the SSID is "SSID_Example3" and the pre-shared key is "ThisismyWPA-PSKpre-sharedkey". After you install the ZyXEL utility and then insert the wireless client, follow the steps below to connect to a network using the Site Survey screen. 48 FSG2200HNU User's Guide