ZyXEL FSG2200HNU User Guide - Page 58
Configuring the Policy Route Screens
View all ZyXEL FSG2200HNU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 3 Tutorial 1 In Windows Explorer's Address bar type a double backslash "\\" followed by the IP address of the ZyXEL Device (the default IP address of the ZyXEL Device is 192.168.1.1) and press [ENTER]. A screen asking for password authentication appears. Type the user name and password and click OK. File Sharing via Windows Explorer Once you are logged on and able to access the files via your ZyXEL Device, you do not have to relogin unless you restart your computer. 3.6 Configuring the Policy Route Screens This section shows you how to configure the Advanced > Policy Route screens. Note: You must configure the WAN interfaces for the ZyXEL Device and assign egress queues to each interface before doing this tutorial. Refer to Section 3.2 on page 37. You want to prioritize your computer's traffic and route it to the Management interface at all times. Let's say you have previously configured the Management interface to have the highest priority (see Section 5.2 on page 76 and Section 5.2.2 on page 86 for information on these screens. Refer to Section 3.2 on page 37 for the tutorial on this.) You should then do the following: • Configure a policy route to forward your computer's traffic to the Management interface. 58 FSG2200HNU User's Guide