ZyXEL NWA3560-N User Guide - Page 113
AP Management
View all ZyXEL NWA3560-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 9 Wireless 9.3 AP Management Use this screen to manage all of the APs connected to the NWA3000-N series AP. Click Configuration > Wireless > AP Management to access this screen. This screen manages the NWA3000-N series AP's general wireless settings if it is in standalone mode or the general wireless settings of all of the NWA3000-N series AP's managed APs if the NWA3000-N series AP is in controller mode. Figure 44 Configuration > Wireless > AP Management (Controller Mode) The following fields display if the NNWA3000-N series AP is in controller mode. Table 37 Configuration > Wireless > AP Management (Controller Mode) LABEL DESCRIPTION Edit Select an AP and click this button to edit its properties. Remove Select an AP and click this button to remove it from the list. Reboot # IP Address MAC Model R1 Mode / Profile R2 Mode / Profile Mgnt. VLAN ID Description Note: If in the Configuration > Wireless > Controller screen you set the Registration Type to Always Accept, then as soon as you remove an AP from this list it reconnects. Select an AP and click this button to force it to restart. This field is a sequential value, and it is not associated with any interface. This field displays the IP address of the AP. This field displays the MAC address of the AP. This field displays the AP's hardware model information. It displays "N/A" (not applicable) only when the AP disconnects from the NWA3000-N series AP and the information is unavailable as a result. This field displays the AP or MON profile for Radio 1. If the NWA3000-N series AP has a second radio this field displays the AP or MON profile for Radio 2. This field displays the ID of the AP's management VLAN. This field displays the AP's description, which you can configure by selecting the AP and clicking the Edit button. NWA3000-N Series User's Guide 113