ZyXEL NWA3560-N User Guide - Page 96
Legacy Device Info Add or Edit, 6.9 View Log
View all ZyXEL NWA3560-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 6 Monitor Table 29 Monitor > Wireless > Legacy Device Info (continued) LABEL DESCRIPTION IP This is the IP address of the legacy AP. Description This is manually entered information about the legacy AP represented by this entry. 6.8.1 Legacy Device Info Add or Edit Use this screen to configure an entry for linking to a compatible legacy AP's Web Configurator. The legacy AP must also be in controller mode. Click Monitor > Wireless > Rogue AP > Legacy Device Info and then click the Add button or select a radio profile from the list and click the Edit button to access this screen. Figure 35 Monitor > Wireless > Legacy Device Info > Add The following table describes the labels in this screen. Table 30 Monitor > Wireless > Legacy Device Info LABEL DESCRIPTION Device IP Address Enter the legacy AP's IP address. Description Enter a description to help you identify the legacy AP. OK Click OK to save your changes back to the NWA3000-N series AP. Cancel Click Cancel to exit this screen without saving your changes. 6.9 View Log Log messages are stored in two separate logs, one for regular log messages and one for debugging messages. In the regular log, you can look at all the log messages by selecting All Logs, or you can select a specific category of log messages (for example, user). You can also look at the debugging log by selecting Debug Log. All debugging messages have the same priority. To access this screen, click Monitor > Log. The log is displayed in the following screen. 96 NWA3000-N Series User's Guide