ZyXEL NWA3560-N User Guide - Page 119
Load Balancing, Configuration > Wireless > Load Balancing
View all ZyXEL NWA3560-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 9 Wireless Table 41 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly LABEL DESCRIPTION OK Click OK to save your changes back to the NWA3000-N series AP. Cancel Click Cancel to close the window with changes unsaved. 9.5 Load Balancing Use this screen to configure wireless network traffic load balancing between the APs on your network. Click Configuration > Wireless > Load Balancing to access this screen. Figure 49 Configuration > Wireless > Load Balancing Each field is described in the following table. Table 42 Configuration > Wireless > Load Balancing LABEL DESCRIPTION Enable Load Balancing Select this to enable load balancing on the NWA3000-N series AP. Mode Select a mode by which load balancing is carried out. Select By Station Number to balance network traffic based on the number of specified stations connect to an AP. Select By Traffic Level to balance network traffic based on the volume generated by the stations connected to an AP. Max Station Number Traffic Level Once the threshold is crossed (either the maximum station numbers or with network traffic), then the AP delays association request and authentication request packets from any new station that attempts to make a connection. This allows the station to automatically attempt to connect to another, less burdened AP if one is available. Enter the threshold number of stations at which an AP begins load balancing its connections. Select the threshold traffic level at which the AP begins load balancing its connections (low, medium, high). NWA3000-N Series User's Guide 119