ZyXEL NWA3560-N User Guide - Page 268
NWA3000-N series AP Access and Login
View all ZyXEL NWA3560-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Chapter 21 Troubleshooting One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 1.7 on page 27. 2 Check the hardware connections. See the Quick Start Guide. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adaptor or PoE power injector to the NWA3000-N series AP. 5 If the problem continues, contact the vendor. 21.3 NWA3000-N series AP Access and Login I forgot the IP address for the NWA3000-N series AP. 1 The default IP address is 192.168.1.2. 2 Use the commands through the console port to check the IP address. Connect your computer to the CONSOLE port using a console cable. Your computer should have a terminal emulation communications program (such as HyperTerminal) set to VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow control and 115200 bps port speed. 3 If this does not work, you have to reset the device to its factory defaults. See Section 21.6 on page 277. I cannot see or access the Login screen in the web configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.2. • If you changed the IP address, use the new IP address. 268 NWA3000-N Series User's Guide