2014 Chevrolet Spark EV Owner Manual - Page 124

5-24 Instruments and Controls . Charge Level Selection The Change Charge Level setting allows the vehicle's charge level to be selected so it matches the capability of the charging location. If the vehicle consistently stops charging after plugging in, or if a circuit breaker continues to trip, reducing to a lower charge level setting may resolve the issue. Reduced: Limits AC current to 8 amps { Warning Using a charge level that exceeds the electrical circuit or electrical outlet capacity may start a fire or damage the electrical circuit. Use the lowest charge level until a qualified electrician inspects your electrical circuit capacity. Use the lowest charge level if the electrical circuit or electrical outlet capacity is not known. Departure Time Entry From the Departure Time or Rate & Departure Time charge mode status screen, press Settings to change the departure time to match your personal schedule. Exact current levels may vary from the values shown in this manual. Please check the vehicle for the current available levels. The charge level setting can be changed at any time while the center stack display is operable. From the Immediately charge mode status screen, select Change Charge Level. From the Departure Time or Rate & Departure Time charge mode status screens, select Settings and then Change Charge Level. The charge level setting must be updated prior to the vehicle being charged and the charge level setting will reset to a default value when the vehicle is shifted from P (Park). The charge level setting should be configured to match the electrical current rating for the electrical outlet that the charge cord is connected to. The charge level settings are: . Maximum: Limits AC current to 12 amps