2014 Chevrolet Spark EV Owner Manual - Page 226

9-34 Driving and Operating 5. Place the charge cord into the storage compartment. Remove ice from the area and repeat attempting to open the charge port door. the AC vehicle plug is fully connected to the AC charge port. If it is not properly seated, the charge may not occur. 6. Verify that the Charging Status Indicator illuminates on top of the instrument panel and a horn chirp occurs. See Charging Status Feedback on page 9-36. End Charge 1. Unlock the vehicle with the RKE transmitter to disarm the charge cord theft alert. 2. Unplug the vehicle plug of the charge cord from the vehicle. Unlock the vehicle plug of the charge cord from the vehicle by pushing the button on the top of the charge cord plug. 3. Close the charge port door by pressing firmly in the center to latch properly. 4. Unplug the charge cord from the electrical outlet. DC Charging AC/DC Charge Cord Vehicle Plug (If Equipped) Start Charge 1. Make sure the vehicle is parked and turned off. 2. Push m on the charge port door and release to open the door. In cold weather conditions, ice may form around the charge port door. The charge port door may not open on the first attempt. 3. Unlatch the DC charging dust cover and lower it fully. 4. Plug in the DC vehicle plug into the DC charge port on the vehicle. Make sure that the DC vehicle plug is fully connected to the DC charge port. If it is not properly seated then the charge may not occur.