2014 Chevrolet Spark EV Owner Manual - Page 253

Vehicle Care 2. Remove the connector retaining tab (1). 3. Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling straight back. 4. Remove the bulb (3) from the headlamp assembly by turning counterclockwise and pulling straight back. 5. Install the new bulb in the headlamp assembly by turning clockwise. 6. Install the wiring harness connector to the bulb. Be sure the connector release (2) locks into place. 7. Install the connector retaining tab (1). 2. Turn the bulb socket counterclockwise and pull it out of the lamp housing. 3. Pull the bulb straight out of the bulb socket. 4. Install the new bulb into the socket by pressing it in. 5. Install the socket into the lamp housing by turning it clockwise. 1. Stoplamp/Taillamp 10-17 Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps 2. Turn Signal Lamp/Taillamp 3. Back-up Lamp To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb: 1. Open the liftgate. See Liftgate on page 2-11. Front Turn Signal/Parking Lamps To replace a front turn signal bulb: 1. Open the hood. See Hood on page 10-4.