2014 Chevrolet Spark EV Owner Manual - Page 37

Keys, Doors, and Windows 2-7 { Caution When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. To replace the battery: 1. Extend the key blade and open the battery cover on the back of the unit. 2. Remove the used battery. Avoid touching the circuit board to other components. 3. Insert the new battery, positive side facing down toward the base. 4. Reassemble the battery cover. 5. Check the operation of the transmitter with the vehicle. Remote Start Use remote start to heat or cool the interior when the vehicle is plugged in to maximize electric range by utilizing electricity from the electrical outlet. Normal operation of the system will return after the vehicle has been turned on. If the vehicle is low on electricity, do not use the remote start feature. The vehicle may run out of electricity. The RKE transmitter range may be less while the vehicle is running. Other conditions can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 2-2. Activating the Remote Start To start the vehicle using the remote start feature: 1. Aim the RKE transmitter at the vehicle. 2. Press and release U (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. The climate control system will use the previous settings during a remote start. The rear defog may come on during remote start based on cold ambient conditions. The rear defog indicator light does not come on during remote start. Laws in some local communities may restrict the use of remote starters. For example, some laws require a person using remote start to have the vehicle in view. Check local regulations for any requirements. Q. 3. Immediately press and hold U for at least four seconds or until the turn signal lamps flash. 4. The vehicle will shut off after 20 minutes unless a time extension is done or O POWER button is pressed.