2014 Chevrolet Spark EV Owner Manual - Page 130

5-30 Instruments and Controls } BACK: Press to return to the previous screen, exit a screen, or return to the main menu. Press BACK to minimize the DIC menu display. } Tutorial Mode and Open Source Software Turn-by-Turn Select this menu item to view the OnStar or Navigation System Turn-by-Turn guidance. Trip The trip display shows distance traveled and average economy since the last trip reset. Reset the trip data by pressing and holding the SELECT button when Trip is displayed. Tire Pressure The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascals (kPa) or in pounds per square inch (psi). If a low or high tire pressure is detected, a message is displayed advising to check the tire pressure z: p: Units in the specified tire. See Tire Pressure on page 10-32 and Tire Messages on page 5-36. If the tire pressure display shows dashes instead of a value, there may be a problem with the vehicle. See your dealer for service. Vehicle Messages Turn the SELECT knob to scroll through any active warning messages. Press SELECT to review the messages. Units Turn the SELECT knob to change the unit display to Metric, US, or Imperial when the display is active. Press SELECT to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements. SELECT: Press the center of the knob to select the highlighted item. Turn the knob to scroll through the menu items. DIC Menu Items At the main DIC menu: 1. Turn the SELECT knob to scroll through the possible DIC menus. 2. Press the center of the SELECT knob when a menu item is highlighted to enter that menu. 3. Continue to turn and press the SELECT knob to scroll through and select the available menu items: u : Turn-by-Turn q : Trip v : Tire Pressure { : Vehicle Messages