2014 Chevrolet Spark EV Owner Manual - Page 144
2014 Chevrolet Spark EV Manual
Page 144 highlights
6-2 Lighting The DRL system makes the headlamps come on when the following conditions are met: . . The 3 light comes on in the instrument cluster while the high beams are on and the ignition is turned to ON/RUN. To return to low beams, push the lever again or pull the lever toward you and release. The DRL system turns off when one of the following conditions is met: . . The ignition is off. The high-beam headlamps are on. The low-beam headlamps are on. The flash-to-pass feature is used. The ignition is on. The exterior lamp control is in the AUTO position during the day. The shift lever is out of the P (Park) position. . Flash-to-Pass This feature is used to signal to the vehicle ahead that you want to pass. Pull the turn signal lever toward you until the high-beam headlamps come on, then release the lever to turn them off. . . The regular headlamp system should be used when needed. Automatic Headlamp System This indicator light in the center stack display comes on when the DRL system is on. When the DRL system is on, the taillamps, sidemarker lamps, parking lamps, and instrument panel lights do not come on unless the exterior lamp control is turned to the parking lamp or headlamp position. When it is dark enough outside and the exterior lamp control is in the automatic position, the headlamps come on automatically. See Exterior Lamp Controls on page 6-1. Daytime Running Lamps (DRL) DRL can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada.