2014 Chevrolet Spark EV Owner Manual - Page 36

2-6 Keys, Doors, and Windows try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also display at this time. To start the vehicle: 1. Remove the rubber cap on the steering column. 3. With the vehicle in P (Park) or N (Neutral), press the brake pedal and the O POWER button on the center stack. See Power Button on page 9-14. Replace the transmitter battery as soon as possible. transmitter to extend the key blade. Insert the key blade into the transmitter slot. 5. Press the O POWER button. When the transmitter is learned the DIC will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter slot and press K. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the O POWER button for 12 seconds to exit programming mode. Replace the plastic trim piece from the small storage area. Battery Replacement Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak or there is interference with the signal, the DIC may display NO REMOTE DETECTED or PLACE KEY IN TRANSMITTER POCKET when you 2. Extend the key blade and place the blade into the slot.