2014 Chevrolet Spark EV Owner Manual - Page 275

Vehicle Care position it is in. Directional tires will have an arrow on the tire indicating the proper direction of rotation or will have "left" or "right" molded on the sidewall. Different tire sizes should not be rotated front to rear. Adjust the front and rear tires to the recommended inflation pressure on the Tire and Loading Information label after the tires have been rotated. See Tire Pressure on page 10-32 and Vehicle Load Limits on page 9-10. Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation on page 10-35. Check that all wheel nuts are properly tightened. See "Wheel Nut Torque" under Capacities and Specifications on page 12-2. Use this rotation pattern if the vehicle has different size tires on the front and rear and they are non-directional. 10-39 Warning (Continued) off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt. { Warning Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come (Continued) Lightly coat the center of the wheel hub with wheel bearing grease after a wheel change or tire rotation to prevent corrosion or rust build-up. Do not get grease on the flat wheel mounting surface or on the wheel nuts or bolts.