2014 Chevrolet Spark EV Owner Manual - Page 225

Driving and Operating 9-33 4. Plug the charge cord into the electrical outlet. See Electrical Requirements for Battery Charging on page 9-41. Verify the charge cord status. See the charge cord user guide and Charge Cord on page 9-40. Select the appropriate charge level using the Change Charge Level setting on the center stack. See Programmable Charging on page 5-20. 2. Push m on the charge port door and release to open the door. In cold weather conditions, ice may form around the charge port door. The charge port door may not open on the first attempt. Remove ice from the area and repeat attempting to open the charge port door. 3. Open the rear hatch, lift the load support floor covering, and remove the charge cord. It is located near the tire sealant and compressor kit. Pull up on the charge cord handle to release it from the handle clip. Lift the charge cord up and rearward to remove it from the vehicle. The vehicle plug is stored as shown. 5. Plug in the AC vehicle plug of the charge cord into the charge port on the vehicle. Make sure