2014 Chevrolet Spark EV Owner Manual - Page 131

Instruments and Controls Tutorial Mode and Open Source Software Select this menu item to view a screen that explains some of the unique features of the cluster or the Open Source Software information for the cluster. Tutorial mode is only available when the vehicle is in P (Park). 5-31 Vehicle Messages Messages displayed in the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. Messages that do not require immediate action can be acknowledged and cleared by pressing the SELECT knob. The messages requiring immediate action cannot be cleared until that action is performed. All messages should be taken seriously. Clearing the messages does not correct the problem. starts reducing certain features trying to save the charge of the 12-volt battery. Turn off unnecessary features to allow the battery to recharge. This message will also display when the high voltage battery is very low. BATTERY TOO COLD, PLUG IN TO WARM This message displays during extremely cold temperatures, when the vehicle will not start until the high voltage battery is warm enough. Plug the vehicle in to an AC charging station and make sure the O POWER button is off to allow the charging system to warm the high voltage battery, then the vehicle can be started. DC charging can not be used to recover a cold high voltage battery. Battery and Charging Messages BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the 12-volt battery voltage has dropped and vehicle features are being disabled. The 12-volt battery saver system