2014 Chevrolet Spark EV Owner Manual - Page 159

Infotainment System . . 7-11 FAT32. exFAT. Connecting a USB Storage Device or iPod/iPhone To connect a USB storage device, connect the device to the USB port. To connect an iPod/iPhone, connect one end of the device's cable to the iPod/iPhone and the other end to the USB port. The iPod/iPhone charges while it is connected to the vehicle if the vehicle is in ACC/ACCESSORY, ON/RUN, or Service Only Mode. See Power Button on page 9-14. When the vehicle is turned off, the iPod/iPhone automatically powers off and will not charge or draw power from the vehicle's battery. For more information on USB usage, see "Audio System Information" under Pictures and Movies (Picture System) on page 7-33 or Pictures and Movies (Audio System) on page 7-28 or Pictures and Movies (Movie System) on page 7-35. Playing Music Auxiliary Devices Using the Auxiliary Input Jack Settings menus and functions may vary depending on vehicle options. The auxiliary input jack in the center stack can be used to connect external audio devices such as an iPod®, iPhone®, MP3 player, CD player, and other supported devices for use as another source for audio listening. This input jack is not an audio output; do not plug headphones into the front auxiliary input jack. The infotainment system can play music or movies connected by the auxiliary device. Play will begin when the system has finished reading the information on the device. To play the music from the device, if the device is already connected: 1. Press 2. 3. D. Press g Multimedia. Press Source R. 4. Press AUX/USB. To adjust the tone settings, see "Tone Settings" under Operation on page 7-4. Playing Movies Movies are not available while driving.