3Com 2928 User Guide - Page 145

Task Configuring an SNMP Community Configuring SNMP Trap Function Remarks Required Optional Allows you to configure that the agent can send SNMP traps to the NMS, and configure information about the target host of the SNMP traps. By default, an agent is allowed to send SNMP traps to the NMS. Configuring SNMPv3 Perform the tasks in Table 1-2 to configure SNMPv3: Table 1-2 SNMPv3 configuration task list Task Remarks Enabling SNMP Required The SNMP agent function is disabled by default. Configuring an SNMP View Optional After creating SNMP views, you can specify an SNMP view for an SNMP group to limit the MIB objects that can be accessed by the SNMP group. Configuring an SNMP Group Required After creating an SNMP group, you can add SNMP users to the group when creating the users. Therefore, you can realize centralized management of users in the group through the management of the group. Configuring an SNMP User Required Before creating an SNMP user, you need to create the SNMP group to which the user belongs. Configuring SNMP Trap Function Optional Allows you to configure that the agent can send SNMP traps to the NMS, and configure information about the target host of the SNMP traps By default, an agent is allowed to send SNMP traps to the NMS. Enabling SNMP Select Device > SNMP from the navigation tree to enter the SNMP configuration page, as shown in Figure 1-4. On the upper part of the page, you can select to enable or disable SNMP and configure parameters such as SNMP version; on the lower part of the page, you can view the SNMP statistics, which helps you understand the running status of the SNMP after your configuration. 1-4