3Com 2928 User Guide - Page 146

Figure 1-4 Set up Table 1-3 describes the configuration items for enabling SNMP. Table 1-3 Configuration items for enabling SNMP SNMP Item Local Engine ID Maximum Packet Size Contact Location SNMP Version Description Specify to enable or disable SNMP. Configure the local engine ID. The validity of a user after it is created depends on the engine ID of the SNMP agent. If the engine ID when the user is created is not identical to the current engine ID, the user is invalid. Configure the maximum size of an SNMP packet that the agent can receive/send. Set a character string to describe the contact information for system maintenance. If the device is faulty, the maintainer can contact the manufacture factory according to the contact information of the device. Set a character string to describe the physical location of the device. Set the SNMP version run by the system Return to SNMPv1 or SNMPv2c configuration task list or SNMPv3 configuration task list. Configuring an SNMP View Select Device > SNMP from the navigation tree, and then click the View tab to enter the page as shown in Figure 1-5. 1-5