3Com 2928 User Guide - Page 170

Modifying Ports Select Network > VLAN from the navigation tree and click Modify Port to enter the page for modifying ports, as shown in Figure 1-7. Figure 1-7 The Modify Port tab Table 1-6 describes the configuration items of modifying ports. Table 1-6 Configuration items of modifying ports Item Description Select Ports Select the ports to be modified. Click the ports to be modified on the chassis front panel. You can select one or more ports. If aggregation groups are configured on the device, the page displays a list of aggregated ports below the chassis front panel. You can select ports from this list. Untagged Select memb ership type Tagged Not A Member VLAN IDs Set the member type of the ports to be modified in the specified VLANs. Select the Untagged, Tagged, or Not A Member radio button: z Untagged: Assigns the selected prots to the specified VLANs as untagged members. After that, the ports send the traffic of those VLANs with the VLAN tags removed. z Tagged: Assigns the selected prots to the specified VLANs as tagged members. After that, the ports send the traffic of those VLANs without removing the VLAN tags. z Not A Member: Removes the selected ports from the specified VLANs. Set the IDs of the VLANs to/from which the selected ports are to be assigned/removed. This item is available when the Untagged, Tagged, or Not A Member option is selected in the Select membership type area. 1-8