3Com 2928 User Guide - Page 372

z Enter the secondary server IP address 10.1.1.1. z Select active as the secondary server's status. z Click Apply to finish the operation. # Configure the scheme used for communication between the device and the RADIUS servers. z Select the RADIUS Setup tab to enter the RADIUS parameter configuration page. Perform the following configurations as shown in Figure 1-17. Figure 1-17 RADIUS parameter configuration z Select extended as the server type. z Select the Authentication Server Shared Key checkbox, and enter name in the textbox. z Enter name again in the Confirm Authentication Shared Key textbox. z Select the Accounting Server Shared Key checkbox, and enter money in the textbox. z Enter money again in the Confirm Accounting Shared Key textbox. z Enter 5 in the Timeout Interval textbox z Enter 5 in the Timeout Retransmission Times textbox. z Enter 15 in the Realtime-Accounting Interval textbox. z Click Apply to finish the operation. 4) Configure AAA # Create an ISP domain. 1-17