3Com 2928 User Guide - Page 242

Table 1-2 Static aggregation group configuration task list Task Remarks Creating a Link Aggregation Group Required Create a static aggregate interface and configure member ports for the static aggregation group automatically created by the system when you create the aggregate interface. By default, no link aggregation group exists. Optional Displaying Information of an Aggregate Interface Perform this task to view detailed information of an existing aggregation group. Configuring a dynamic aggregation group Perform the tasks in Table 1-3 to configure a dynamic aggregation group. Table 1-3 Dynamic aggregation group configuration task list Task Remarks Creating a Link Aggregation Group Required Create a dynamic aggregate interface and configure member ports for the dynamic aggregation group automatically created by the system when you create the aggregate interface. LACP is enabled automatically on all the member ports. By default, no link aggregation group exists. Optional Displaying Information of an Aggregate Interface Perform this task to view detailed information of an existing aggregation group. Setting LACP Priority Optional Perform the task to set LACP priority for the local system and link aggregation member ports. Changes of LACP priorities affect the selected/unselected state of link aggregation member ports. The default port LACP priority and system LACP priority are both 32768. Displaying Information of LACP-Enabled Ports Optional Perform the task to view detailed information of LACP-enabled ports and the corresponding remote (partner) ports. Creating a Link Aggregation Group Select Network > Link Aggregation from the navigation tree, and then click Create to enter the page as shown in Figure 1-1. 1-5