3Com 2928 User Guide - Page 149

Figure 1-9 Configure an SNMP community Figure 1-10 Create an SNMP Community Table 1-5 describes the configuration items for configuring an SNMP community. Table 1-5 Configuration items for configuring an SNMP community Item Community Name Access Right View ACL Description Set the SNMP community name. Configure SNMP NMS access right z Read only: The NMS can perform read-only operations to the MIB objects when it uses this community name to access the agent, z Read and write: The NMS can perform both read and write operations to the MIB objects when it uses this community name to access the agent. Specify the view associated with the community to limit the MIB objects that can be accessed by the NMS. Associate the community with a basic ACL to allow or prohibit the access to the agent from the NMS with the specified source IP address. Return to SNMPv1 or SNMPv2c configuration task list. Configuring an SNMP Group Select Device > SNMP from the navigation tree, then click the Group tab to enter the page as shown in Figure 1-11. Click Add to enter the Add SNMP Group page as shown in Figure 1-12. 1-8