3Com 2928 User Guide - Page 338

Trace Route Operation z The Web interface supports trace route on IPv4 addresses only. z Before performing the trace route operation on the Web interface, on the device execute the commands of ip ttl-expires enable and ip unreachables enable to enable the sending of ICMP timeout and destination unreachable packets. Select Network > Diagnostic Tools from the navigation tree and then select the Trace Route to enter the Trace Route configuration page, as shown in Figure 1-3. Figure 1-3 Trace Route configuration page Type the destination IP address in the Trace Route text box, and click Start to execute the trace route command. You will see the result in the Result area, as shown in Figure 1-4. Figure 1-4 Trace route operation result 1-3