3Com 2928 User Guide - Page 34
Configuration Example for Upgrading the Host Software Through the CLI, Network requirements
UPC - 662705557113
View all 3Com 2928 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
# Download software package main.bin from the TFTP server and use the boot file in the package at the next startup. upgrade 192.168.20.41 main.bin runtime Configuration Example for Upgrading the Host Software Through the CLI Network requirements As shown in Figure 3-8, a Switch 2900 series switch is connected to the PC through the console cable, and connected to the gateway through GigabitEthernet 1/0/1. The IP address of the gateway is 192.168.1.1/24, and that of the TFTP server where the host software (suppose its name is Switch2900.bin) is located is 192.168.10.1/24. The route between the gateway and the switch is reachable. The administrator upgrades the Boot ROM and the system boot file of the 2900 switch through the configuration PC and sets the IP address of the switch to 192.168.1.2/24. Figure 3-8 Network diagram for upgrading the host software of the 2900 switch through CLI Configuration procedure 1) Run the TFTP server program on the TFTP server, and specify the path of the program to be loaded. (Omitted) 2) Perform the following configurations on the switch. # Configure the IP address of VLAN-interface 1 of the switch as 192.168.1.2/24, and specify the default gateway as 192.168.1.1. ipsetup ip-address 192.168.1.2 24 default-gateway 192.168.1.1 # Download the host software package Switch2900.bin on the TFTP server to the switch, and specify it as the boot file for the next system boot. upgrade 192.168.10.1 Switch2900.bin runtime File will be transferred in binary mode Downloading file from remote TFTP server, please wait...| TFTP: 253700 bytes received in 2 second(s) File downloaded successfully. BootRom file updating finished! # Download the host software package Switch2900.bin on the TFTP server to the switch, and specify it as the Boot ROM file for the next system boot. upgrade 192.168.10.1 Switch2900.bin bootrom The file flash:/ Switch2900.bin exists. Overwrite it? [Y/N]:y Verifying server file... File will be transferred in binary mode Downloading file from remote TFTP server, please wait.../ TFTP: 9711592 bytes received in 186 second(s) 3-12