3Com 2928 User Guide - Page 25

information and the use of the HyperTerminal, refer to the HyperTerminal Help documentation in Help and Support Center on the PC running the Windows operating system. In the following configuration procedure, Windows XP HyperTerminal is used to communicate with the switch. 1) Start the PC and run the terminal emulation program. 2) Set terminal parameters as follows: z Bits per second: 38,400 z Data bits: 8 z Parity: None z Stop bits: 1 z Flow control: None z Emulation: VT100 The specific procedure is as follows: Step1 Select Start > Programs > Accessories > Communications > HyperTerminal to enter the HyperTerminal window. The Connection Description dialog box appears, as shown below. Figure 3-3 Connection description of the HyperTerminal Step2 Type the name of the new connection in the Name text box and click OK. The following dialog box appears. Select the serial port to be used from the Connect using drop-down list. 3-3