3Com 2928 User Guide - Page 28

Logging In to the CLI The login process requires a user name and password. The default user name for first time configuration is admin, no password is required. User names and passwords are case sensitive. To logon to the CLI Interface: Step1 Press Enter. The Username prompt displays: Login authentication Username: Step2 Enter your User Name at the Username prompt. Username:admin Step3 Press Enter. The Password prompt display Password: The login information is verified, and displays the following CLI menu: If the password is invalid, the following message appears and process restarts. % Login failed! CLI Commands This Command section contains the following commands: To do... Use the command... Displays a list of CLI commands on the device ? Reboot the device and run the default configuration initialize Specify VLAN-interface 1 to obtain an IP address through DHCP or manual configuration ipsetup { dhcp | ip address ip-address { mask | mask-length } [ default-gateway ip-address ] } Modify the login password of a user password Download the Boot ROM program or boot file from the upgrade server-address source-filename TFTP server and specify it to be used at the next startup { bootrom | runtime } Reboot the device and run the main configuration file reboot View the summary information of the device summary Ping a specified destination ping host initialize Syntax initialize Parameters None 3-6