3Com 2928 User Guide - Page 301

Field Preference Next Hop Interface Description Preference value for the IPv4 route The smaller the number, the higher the preference. Nexthop IP address of the IPv4 route Outgoing interface of the IPv4 route. Packets destined for the specified network segment will be sent out the interface. Creating an IPv4 Static Route Select Network > IPv4 Routing from the navigation tree and click the Create tab to enter the IPv4 static route configuration page, as shown in Figure 1-2. Figure 1-2 Create an IPv4 static route Table 1-2 describes the IPv4 static route configuration items: Table 1-2 IPv4 static route configuration items Item Destination IP Address Mask Description Type the destination host or network IP address, in dotted decimal notation. Type the mask of the destination IP address. Select a mask length (number of consecutive 1s in the mask) or a mask in dotted decimal notation from the drop-down list. 1-3