3Com 2928 User Guide - Page 153

Figure 1-15 Traps configuration Figure 1-16 Add a target host of SNMP traps Table 1-8 describes the configuration items for adding a target host of SNMP traps. Table 1-8 Configuration items for adding a target host Item Destination IP Address Security Name UDP Port Security Model Security Level Description Set the destination IP address. Select the IP address type: IPv4 or IPv6, and then type the corresponding IP address in the text box according to the IP address type. Set the security name, which can be an SNMPv1 community name, an SNMPv2c community name, or an SNMPv3 user name. Set UDP port number. Select the security model, that is, the SNMP version. Ensure that the SNMP version is the same with that on the NMS; otherwise, the NMS cannot receive any trap. Set the authentication and privacy mode for SNMP traps when the security model is selected as v3. The available security levels are: no authentication no privacy, authentication but no privacy, and authentication and privacy. When the security model is selected as v1 or v2c, the security level is no authentication no privacy, and cannot be modified. 1-12