3Com 2928 User Guide - Page 148

Table 1-4 Configuration items for creating an SNMP view Item Description View Name Rule MIB Subtree OID Subtree Mask Set the SNMP view name. Select to exclude or include the objects in the view range determined by the MIB subtree OID and subtree mask. Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system). MIB subtree OID identifies the position of a node in the MIB tree, and it can uniquely identify a MIB subtree. Set the subtree mask. If no subtree mask is specified, the default subtree mask (all Fs) will be used for mask-OID matching. Adding rules to an SNMP view Click the icon corresponding to the specified view on the page as shown in Figure 1-5, the Add rule for the view ViewDefault window appears as shown in Figure 1-8. After configuring the parameters, click Apply to add the rule for the view. Table 1-4 describes the configuration items for creating an SNMP view. Figure 1-8 Add rules to an SNMP view You can also click the icon corresponding to the specified view on the page as shown in Figure 1-5, and then you can enter the page to modify the view. Return to SNMPv1 or SNMPv2c configuration task list or SNMPv3 configuration task list. Configuring an SNMP Community Select Device > SNMP from the navigation tree, then click the Community tab to enter the page as shown in Figure 1-9. Click Add to enter the Add SNMP Community page as shown in Figure 1-10. 1-7