3Com 2928 User Guide - Page 222

Protocols and Standards MSTP is documented in: z IEEE 802.1d: Spanning Tree Protocol z IEEE 802.1w: Rapid Spanning Tree Protocol z IEEE 802.1s: Multiple Spanning Tree Protocol Configuring MSTP Configuration Task List Perform the tasks described in Table 1-7 to configure MSTP. Table 1-7 MSTP configuration task list Task Remarks Configuring an MST Region Optional Configure the MST region-related parameters and VLAN-to-MSTI mappings. By default, the MST region-related parameters adopt the default values, and all VLANs in an MST region are mapped to MSTI 0. Configuring MSTP Globally Required Enable MSTP globally and configure MSTP parameters. By default, MSTP is enabled globally; and all MSTP parameters have default values. Configuring MSTP on a Port Optional Enable MSTP on a port and configure MSTP parameters. By default, MSTP is enabled on a port, and all MSTP parameters adopt the default values. Displaying MSTP Information of a Port Optional Display MSTP information of a port in MSTI 0, the MSTI to which the port belongs, and the path cost and priority of the port. Configuring an MST Region Select Network > MSTP from the navigation tree to enter the page as shown in Figure 1-6. Figure 1-6 MST region Click Modify to enter the page for configuring MST regions, as shown in Figure 1-7. 1-15