Adaptec 3200S User Guide - Page 108
Using a Custom Connection, Under the Custom Connections of the Available Connections
UPC - 760884136430
View all Adaptec 3200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Storage Manager Using a Custom Connection Under the Custom Connections section of the Available Connections window, there is one icon for each system that you marked for display in the Phonebook. To make a connection to a remote system, double-click the icon. The Connection Information window appears, as shown in Figure 3-31. Enter the password of the server selected. Refer to Connecting Servers and Workstations on page 3-59 for details. Figure 3-31. Connection Information Window - Custom When you click OK, Storage Manager attempts to connect to the remote system. If the connection is successful, Storage Manager scans the controller on the remote system. After the scan is complete the Physical Configuration View window for the remote system appears. As noted before, you may also use the IP=address command line parameter when you start Storage Manager. This parameter causes Storage Manager to connect to the remote system at a specified IP address instead of the default Local connection. 3-63