Adaptec 3200S User Guide - Page 115
RAID Operation, -C Load/save configuration, -r Specify task rate, -w Write caching
UPC - 760884136430
View all Adaptec 3200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
RAIDUTIL Command Line Utility RAID Operation -C Load/save configuration This switch has two options: load Loads the specified configuration file save Saves the current configuration to the file name specified A file name must follow the load or save parameter. This is a .dsm file, which can also be loaded or saved using Storage Manager. -r Specify task rate This switch sets a task priority for the device or logical drive. The parameter can be 0 - 9; with 0 being the slowest and 9 being the fastest. You can also specify the rate as follows: -r slow = 1 -r medslow = 3 -r med = 5 -r medfast = 7 -r fast = 9 The device address is required. Specify logical drives by their device addresses. You can set the rate for all logical drives on a controller by using the device address of the controller. -w Write caching Options are On and Off. The default (On) uses Write-Back caching. Off sets the operation to Write-Through caching. Specify drives using the device address. 4-7