Asus AP1720-E1 User Guide - Page 40
Installing an HDD dummy cover
View all Asus AP1720-E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing an HDD dummy cover Except on the 8-SCSI configuration model (AS8), the HDD dummy covers come pre-installed on the front panel bezel. In case you removed the covers, follow these steps to re-install them. To install an HDD dummy cover: 1. From the inside of the front panel assembly, insert the flat end of a dummy cover into the slot as shown. The end with the hook tab should be close to the front panel LEDs. Flat end 2. Press the dummy cover into the slot opening until the hook tab clicks in place. Hook tab 3. When installed, the dummy cover appears as shown. 2-24 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-24
2.
Press the dummy cover into the slot
opening until the hook tab clicks in
place.
3. When installed, the dummy cover
appears as shown.
Installing an HDD dummy cover
Except on the 8-SCSI configuration model (AS8), the HDD dummy covers
come pre-installed on the front panel bezel. In case you removed the
covers, follow these steps to re-install them.
To install an HDD dummy cover:
1.
From the inside of the front panel
assembly, insert the flat end of a
dummy cover into the slot as shown.
The end with the hook tab should be
close to the front panel LEDs.
Flat end
Hook tab