Asus Adaptec 2020 ZCR User Manual - Page 34
Using the Adaptec RAID Configuration (ARC) Utility, Installing the, Controller and Drives
View all Asus Adaptec 2020 ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing the Controller and Drives Using the Adaptec RAID Configuration (ARC) Utility To build a bootable RAID 5 array using ARC: 1 Install the controller and drives, as described in Installing the Controller and Drives on page 2-3. Note: For a RAID 5, you need at least 3 drives. 2 Turn on the computer, then press Ctrl-A to enter the ARC utility. The first screen shows all installed Adaptec RAID controllers. 3 If more than one Adaptec RAID controller is installed, highlight the boot controller, then press Enter. 4 To select the ACU utility, press Enter. The ACU screen appears. 5 Using the arrow keys, highlight Initialize Drives, then press Enter. 6 Press Insert to highlight the drives you want to initialize, then press Enter to start the initialization process. 7 Using the arrow keys, highlight at least three drives to be used for the array and press Insert for each highlighted drive. The utility displays the selected drives. 8 Press Enter. A red warning box appears-this is normal. 9 Press Y, then Enter. The selected drives are initialized, then the ACU screen is displayed. 10 Using the arrow keys, highlight Create Array, then press Enter. 11 Using the arrow keys as in Step 7, highlight at least three drives to be used in the array and press Insert for each highlighted drive. 12 Press Enter. 2-6