Asus Adaptec 2020 ZCR User Manual - Page 77
SATA Configuration Options, SCSI Channel Interface Definitions
View all Asus Adaptec 2020 ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Adaptec RAID Configuration Utility (ARC) SATA Configuration Options The SATA Configuration options are described in the table below. Option Default Write Cache Yes Models Affected All SATA controllers Description When Enabled, write cache is enabled, providing maximum performance. Caution-When Enabled, there is a potential for data loss or corruption during a power failure. SCSI Configuration Options To access the SCSI Device Configuration options, select SCSI Configuration. SCSI Channel Interface Definitions The SCSI Channel Interface Definitions are described in the table below. Option Controller SCSI Channel ID SCSI Parity Checking Controller SCSI Channel Termination Default 7 Enabled Auto Mode Description Sets the controller's SCSI ID. Adaptec recommends that you leave the controller set to the default, which gives it the highest priority on the SCSI channel. Determines whether the controller verifies the accuracy of data transfer on the SCSI channel. You should disable SCSI Parity Checking on the controller and all SCSI devices if any SCSI device supported by the controller does not support SCSI parity; otherwise, retain the default. Most SCSI devices do support SCSI parity. If you are not sure whether a device supports SCSI parity, consult the documentation for the device. Sets termination on the controller. Adaptec recommends that you retain the default setting. A-12