Asus Adaptec 2020 ZCR User Manual - Page 35
Using the Adaptec Installation CD
View all Asus Adaptec 2020 ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing the Controller and Drives 13 On the next screen, respond as follows: Property Line Displayed Array Type Array Label Array Size Stripe Size Read Caching Write Caching Create RAID via [Done] Entry or Selection Select RAID 5, then press Enter Type a name, then press Enter. Press Enter, then press Enter again to use the default granularity of GB. Press Enter. Press Enter. Press Enter. Press Enter. Press Enter. A Creating Array window appears. 14 Press Enter to continue with the array configuration. Note: You can start using the array immediately. However, performance is reduced until the build process is complete. 15 Press Esc until the Exit Utility window appears. 16 Highlight Yes, then press Enter. The system restarts. 17 Install the driver as described in Chapter 3. Using the Adaptec Installation CD Note: SCSI only-You cannot create the RAID using a CD drive connected to the RAID controller. To build a bootable RAID 5 array using the Adaptec installation CD: 1 Install the controller and drives, as described in Installing the Controller and Drives on page 2-3. 2 Start or restart the computer. 2-7