Brother International ™ QL-650TD Users Manual - English and Spanish - Page 54
Maintenance, Print head maintenance, Roller maintenance
View all Brother International ™ QL-650TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
54 STEP4 Maintenance and Troubleshooting Maintenance Maintenance of the printer must be done as needed. However, some environments require that maintenance must be done more frequently (e.g. in dusty conditions). Print head maintenance The DK Roll (thermal recording paper type) used with the printer is designed to clean the print head automatically. When the DK Roll passes the print head during printing and label feeding, the print head is cleaned. Roller maintenance Clean the roller using the cleaning sheet (separately available). the printer contains only one cleaning sheet. To purchase additional cleaning sheets, refer to Î"Accessories (For USA Only)" in page 63 as needed. When doing maintenance on the roller, be sure to use the cleaning sheet exclusive for this printer only. If using other cleaning sheet, the surface of roller may be scratched or it may cause a malfunction. 1 Turn OFF the power of the printer. 2 Lift the both sides of lower part of DK Roll cover on the front side of the printer to open the cover. 3 Pull up the roll release lever and remove the DK Roll. Before cleaning the roller, it is necessary to remove the DK Roll. Otherwise, the roller cleaning function does not function normally.