Brother International ™ QL-650TD Users Manual - English and Spanish - Page 55
Label outlet maintenance, After inserting the cleaning sheet into
View all Brother International ™ QL-650TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Introduction 55 4 Insert the edge (A) of cleaning sheet into the printing unit and pull it out to just in front of the cutter. • Insert the sheet without removing the A part of sheet. • Check that the printing surface of cleaning sheet is upward. STEP 1 Before using the printer Using only this printer (No PC) Connecting to your PC For Macintosh For Windows 5 After inserting the cleaning sheet into the printing unit, push down the roll release lever and remove the B part of cleaning sheet. STEP 2 6 Close the DK Roll cover and turn ON the power of the printer. 7 Press the Feed button for more than one second. The roller spins by 4" (10 cm). The adhesive face of cleaning sheet removes the stain or dust on the roller. • If not pressing the Feed button for more than one second, the roller spins only 1/3" (8 mm). • Dispose the cleaning sheet after use. Feed button STEP 3 Label outlet maintenance When the glue is attached on the label outlet (metallic plate part and resin guide part) and the printer chews up a label, pull out the power plug from the outlet and clean it up with cloth dipped into ethanol or isopropyl alcohol. It is recommended to clean the label outlet when replacing the cutter unit. Label outlet STEP 4 Maintenance and Troubleshooting