Brother International BES Embroidery Software 2 Instruction Manual - English - Page 87

Text Properties 85 4 In the Inset box, enter the amount of distance you want. Enter a zero value if you want to place the underlay directly on the edge of the segment. 5 Click Apply. Pull Compensation Settings Pacesetter BES Lettering 2 allows you to adjust the pull compensation in your design. In the Properties panel, you can use the settings available in the Pull Compensation area to adjust the pull compensation of text objects. There are two types of pull-compensation, which differ in the way that the pull compensation is determined. • A percentage pull-compensation calculates the change made to the stitches' width based on their original width. • An absolute pull compensation is simply an extra amount of width which is added to the stitches regardless of their original length. When you use percentage pull-compensation, you can also enter a value in the Max range box of the Pull Compensation area. This value sets an absolute maximum limit on the size of the pull compensation. If the calculated pull compensation value goes over this length, the actual stitches that are generated will be limited to this length. To adjust the pull compensation: 1 Select the item you want to adjust. 2 Press ALT + Enter to display the Properties panel, if it is not already visible. You see the Properties panel. 3 In the Pull Compensation Area of the Properties panel, click the down arrow to the right of the Type field. 4 A list of options is displayed. 5 Select one of the following options:  None. Makes no adjustments to pull compensation.