Brother International HL-6180DW Network User's Guide - English - Page 47
Printing the Printer Settings For HL-5450DN(T)), Printing the Network Configuration Report (
View all Brother International HL-6180DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Control panel setup Printing the Printer Settings Page (For HL-5450DN(T)) 4 Note Node name: The Node name appears on the Network Configuration Report. The default node name is "BRNxxxxxxxxxxxx". ("xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.) The Printer Settings Page prints a report listing all the current printer settings including the network print server settings. You can print the Printer Settings Page using Go of the machine. 4 a Make sure that the front cover is closed and the power cord is plugged in. b Turn on the machine and wait until the machine is in the Ready state. c Press Go three times within 2 seconds. The machine will print the current Printer Settings Page. Printing the Network Configuration Report (For HL-5470DW(T) and HL-6180DW(T)) 4 Note Node name: The Node name appears on the Network Configuration Report. The default node name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network. ("xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.) The Network Configuration Report prints a report listing all the current network configuration including the network print server settings. a Press a or b to choose Machine Info.. Press OK. b Press a or b to choose Print NetSetting. Press OK. Note If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again. 41