Brother International HL-7050N Users Manual - English - Page 109

SETUP Display Shows LANGUAGE PANEL CONTROL ERROR BUZZER PANEL BUZZER BUZZER VOLUME POWER SAVE TIME TONER LOW AUTO CONTINUE LOCK PANEL REPRINT PAGE PROTECTION EMULATION Description = ENGLISH /FRANÇAIS /... Subsetting Description LOWER LCD =NONE/PAGE COUNTER/JOB NAME LCD DENSITY =1/2 AUTO ONLINE =ON/OFF BUTTON REPEAT Set the time for the display message to change when holding the + or button at intervals of: 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 or 2.0 seconds. The factory setting is 0.1. MESSAGE SCROLL Set the time in seconds that an LCD message will scroll across the display. From Level 1=0.2 to Level 10=2.0. The factory setting is Level 1. OFF NORMAL There will be three sets of five Buzzes when an error occurs. SPECIAL Buzzes five times consecutively until the error is cleared. OFF Disables buzz function when you press the button. ON Enables buzz function when you press the button. LOW Makes the buzz lower. HIGH Makes the buzz higher. =1MIN:240MIN =CONTINUE/STOP CONT: Continue printing even if there is a TONER LOW error. STOP: Stop printing if there is a TONER LOW error. =OFF/ON =OFF/ON Turn the lock panel setting ON or OFF. PASS NO.=### =ON/OFF PROTECT = AUTO AUTO, OFF, LETTER, A4 OR LEGAL =AUTO (EPSON)/AUTO(IBM)/HP LASER JET/.... 3 - 25 CONTROL PANEL