Brother International HL-7050N Users Manual - English - Page 177

Paper may jam in the paper tray, inside the printer, in the face-up output tray or where the paper comes out of the printer. Check where the jam is and follow the instructions below to remove the jammed paper. If the error message still appears on the LCD after you remove the jammed paper, there may be more paper jammed somewhere else. Please check the printer thoroughly. After you have removed all the jammed paper, open the top cover and then close it again to start printing. If the paper is misfeeding or a lot of pages are going through at the same time when you print on small or thick paper, change the paper thickness switches that are on the bottom of the paper tray as follows. Figure 6-2 Other (Default setting) Switch 1:ON Switch 2:OFF A6 Switch 1:OFF Switch 2:OFF A4 100 g/m2 (27 lbs) Switch 1:ON Letter 105 g/m2 (28 lbs) Switch 2:ON Legal 105 g/m2 (28 lbs) Executive, A5, B6 Switch 1:OFF Switch 2:ON Do not use the following: ■ Bent paper ■ Moist paper ■ Paper that does not meet specifications 6 - 9 TROUBLESHOOTING